PicBasic™ Sample Code for the Labx3 Experimenter Board

blinkx3.pbc
PICBASIC program to blink an LED connected to PORTB.4 about once a second
butx3.pbc
PICBASIC program to show button press on LED
hellox3.pbc
PICBASIC program to send "Hello World" on serial port
hserx3.pbc
PICBASIC program to send and receive from the hardware serial port LEDs count characters and flash error if none received for 10 seconds
lcdx3.pbc
PICBASIC program to demonstrate operation of an LCD in 4-bit mode
potx3.pbc
PICBASIC program to send pot value to serial port
servox3.pbc
PICBASIC program to move RC servo using potentiometer
upperx3.pbc
PICBASIC upper case serial filter