' Name        : BLINKX4.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 8-pin PIC12F675 or similar types
' Hardware    : Lab-X4 board
' Oscillator  : 4MHz internal
' Keywords    : HIGH, LOW
' Description : PICBASIC PRO program to blink an LED connected
' to GPIO.0 about once a second
'

Define OSCCAL_1K 1  ' Calibrate internal oscillator

   LED Con 0     ' Alias GPIO.0 to LED

   ANSEL = 0     ' Set all digital
   CMCON = 7     ' Analog comparators off

mainloop:
   Low LED       ' Turn on LED connected to GPIO.0
   Pause 500     ' Delay for .5 seconds
   High LED      ' Turn off LED connected to GPIO.0
   Pause 500     ' Delay for .5 seconds

   Goto mainloop ' Go back to mainloop and blink LED forever

   End