' Name        : ADCIN2XU.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : MPASM
' Target PIC  : PIC18F4550 or similar type
' Hardware    : LAB-XUSB Experimenter Board
' Oscillator  : 20MHz external
' Keywords    : ADCIN, LCDOUT
' Description : PICBASIC PRO program to display result of 8-bit A/D
' conversion on LCD. Connect analog input to channels 0, 1 (RA0, 1).
'

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define LOADER_USED 1

' RESET_ORG can be set to move the BASIC program out of the way
' of any boot loader running from location 0, such as the
' Microchip USB boot loader
'Define RESET_ORG 800h

Define OSC 48           ' Core is running at 48MHz

' Define LCD registers and bits
Define LCD_DREG  PORTD
Define LCD_DBIT  4
Define LCD_RSREG PORTE
Define LCD_RSBIT 0
Define LCD_EREG  PORTE
Define LCD_EBIT  1

' Define ADCIN parameters
Define ADC_BITS      8  ' Set number of bits in result
Define ADC_CLOCK     3  ' Set clock source (3=rc)
Define ADC_SAMPLEUS 50  ' Set sampling time in uS

adval Var Byte          ' Create adval to store result

   TRISA = %11111111    ' Set PORTA to all input
   ADCON1 = %00001010   ' Set PORTA analog
   Pause 500            ' Wait .5 second

mainloop:
   Lcdout $fe, 1        ' Clear the LCD
   Adcin 0, adval       ' Read the first ADC channel
   Lcdout "0=", #adval  ' Send it to the LCD

   Adcin 1, adval       ' Read the second ADC channel
   Lcdout " 1=", #adval ' Send it to the LCD
   Pause 200            ' Delay for time to read the display
   GoTo mainloop        ' Do it forever

   End