ME Labs, Inc. | 1-719-520-5323 | Example Program - adcin8x.pbp

' Name        : adcin8x.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 40-pin 16F877A, 18F452 or similar
' Hardware    : Lab-X1
' Oscillator  : 4MHz external crystal
' Keywords    : ADC, ADCIN, ANALOG, LCDOUT, LCD
' Description : PICBASIC PRO program to display result of 
' 8-bit A/D conversion on LCD
'
' Connect analog input to channel-0 (RA0)

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define  LOADER_USED 1

' Define LCD registers and bits
Define  LCD_DREG  PORTD
Define  LCD_DBIT  4
Define  LCD_RSREG PORTE
Define  LCD_RSBIT 0
Define  LCD_EREG  PORTE
Define  LCD_EBIT  1

' Define ADCIN parameters
Define  ADC_BITS  8       ' Set number of bits in result
Define  ADC_CLOCK 3       ' Set clock source (3=rc)
Define  ADC_SAMPLEUS  50  ' Set sampling time in uS

adval Var Byte            ' Create adval to store result


  TRISA = %11111111       ' Set PORTA to all input
  ADCON1 = %00000010      ' Set PORTA analog
  Low PORTE.2             ' LCD R/W line low (W)

  Pause 500               ' Wait .5 second

mainloop: 
  ADCIN 0, adval          ' Read channel 0 to adval

  Lcdout $fe, 1           ' Clear LCD
  Lcdout "Value: ", DEC adval ' Display the decimal value  

  Pause 100               ' Wait .1 second

  Goto mainloop           ' Do it forever

  End

           

Download the program file.