ME Labs, Inc.
719-520-5323
 
Home:
  Developer Resources:

Programming Clues
    Sample Programs
   
    PICBASIC PRO™
Compiler Manual
    PICBASIC™ Compiler
Manual
    Serin2/Serout2 Modes
    ASCII Character Set
    Number Conversion
    Floating Point
Routines
    PBP Debug Monitor
    Articles and Tutorials

Hardware Clues
    Parts / Vendor List
    PICPROTO™ Boards
    LAB-X1 Docs
    LAB-X2 Docs
    LAB-X20 Docs
    LAB-X3 Docs
    LAB-X4 Docs
    LAB-XUSB Docs
    LAB-XT Docs
     
 

ME Labs, Inc. | 1-719-520-5323 | Example Program - adcx.pbp

PICBASIC PRO program to read pots on 16F877 ADC
' Name        : adcx.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 40-pin 16F877A, 18F452 or similar
' Hardware    : Lab-X1
' Oscillator  : 4MHz external crystal
' Keywords    : ADC, ANALOG, LCDOUT, LCD
' Description : PICBASIC PRO program to read pots on 16F877 ADC

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define	LOADER_USED	1

' Define LCD pins
Define  LCD_DREG        PORTD
Define  LCD_DBIT        4
Define  LCD_RSREG       PORTE
Define  LCD_RSBIT       0
Define  LCD_EREG        PORTE
Define  LCD_EBIT        1

' Allocate variables
x       Var     Byte
y       Var     Byte
z       Var     Byte

        ADCON1 = 4              ' Set PortA 0, 1, 3 to analog inputs

        Low PORTE.2             ' LCD R/W line low (W)
        Pause 100               ' Wait for LCD to start

        Goto    mainloop        ' Skip subroutines


' Subroutine to read a/d convertor
getad:
        Pauseus 50              ' Wait for channel to setup

        ADCON0.2 = 1            ' Start conversion
        Pauseus 50              ' Wait for conversion

        Return

' Subroutine to get pot x value
getx:
        ADCON0 = $41            ' Set A/D to Fosc/8, Channel 0, On
        Gosub getad
        x = ADRESH
        Return

' Subroutine to get pot y value
gety:
        ADCON0 = $49            ' Set A/D to Fosc/8, Channel 1, On
        Gosub getad
        y = ADRESH
        Return

' Subroutine to get pot z value
getz:
        ADCON0 = $59            ' Set A/D to Fosc/8, Channel 3, On
        Gosub getad
        z = ADRESH
        Return


mainloop:
        Gosub   getx            ' Get x value
        Gosub   gety            ' Get y value
        Gosub   getz            ' Get z value

        Lcdout $fe, 1, "x=", #x, " y=", #y, " z=", #z   ' Send values to LCD
        Pause   100             ' Do it about 10 times a second

        Goto    mainloop        ' Do it forever

        End

           

Download the program file.