ME Labs, Inc. | 1-719-520-5323 | Example Program - I2CX.pbp

' Name        : I2CX.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 40-pin 16F877A, 18F452 or similar
' Hardware    : LAB-X1 Experimenter Board
' Oscillator  : 4MHz external crystal
' Keywords    : I2CREAD, I2CWRITE, LCDOUT, STEP
' Description : PICBASIC PRO program to read and write to I2C SEEPROMs
' that require a byte-sized address. Writes to the first 16 locations
' of an external serial EEPROM. Reads first 16 locations back and send
' to LCD repeatedly.
' 

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define LOADER_USED 1

' Define LCD registers and bits
Define LCD_DREG  PORTD
Define LCD_DBIT  4
Define LCD_RSREG PORTE
Define LCD_RSBIT 0
Define LCD_EREG  PORTE
Define LCD_EBIT  1

SCL Var PORTC.3  ' Clock pin
SDA Var PORTC.4  ' Data pin
B0  Var Byte     ' Address
B1  Var Byte     ' Data 1
B2  Var Byte     ' Data 2

   ADCON1 = 7    ' Set PORTA and PORTE to digital
   Low PORTE.2   ' LCD R/W line low (W)
   Pause 100     ' Wait for LCD to start up

   For B0 = 0 To 15   ' Loop 16 times
       B1 = B0 + 100  ' B1 is data for SEEPROM
       I2CWRITE SDA,SCL,$A0,B0,[B1] ' Write each location
       Pause 10       ' Delay 10ms after each write
   Next B0

mainloop:
   For B0 = 0 To 15 Step 2   ' Loop 8 times
       I2CREAD SDA,SCL,$A0,B0,[B1,B2]        ' Read 2 locations in a row
       Lcdout $fe,1,#B0,": ",#B1," ",#B2," " ' Display 2 locations
       Pause 1000
   Next B0
   Goto mainloop

   End

           

Download the program file.