ME Labs, Inc. | 1-719-520-5323 | Example Program - KEYX.pbp

' Name        : KEYX.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 40-pin 16F877A, 18F452 or similar
' Hardware    : LAB-X1 Experimenter Board
' Oscillator  : 4MHz external crystal
' Keywords    : DCD, LCDOUT, NCD
' Description : PICBASIC PRO program to display key numbers
' on LAB-X1 LCD.
'

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define LOADER_USED 1

' Define LCD connections
Define LCD_DREG  PORTD
Define LCD_DBIT  4
Define LCD_RSREG PORTE
Define LCD_RSBIT 0
Define LCD_EREG  PORTE
Define LCD_EBIT  1

' Define program variables
col Var Byte     ' Keypad column
row Var Byte     ' Keypad row
key Var Byte     ' Key value

   OPTION_REG.7 = 0 ' Enable PORTB pullups
   ADCON1 = 7       ' Make PORTA and PORTE digital
   Low PORTE.2      ' LCD R/W low (write)
   Pause 100        ' Wait for LCD to start

   Lcdout $fe, 1, "Press any key"  ' Display sign on message

mainloop:
   Gosub getkey         ' Get a key from the keypad
   Lcdout $fe, 1, #key  ' Display ASCII key number
   Goto mainloop        ' Do it forever

' Subroutine to get a key from keypad
getkey:
   Pause 50             ' Debounce

getkeyu:
   ' Wait for all keys up
   PORTB = 0            ' All output pins low
   TRISB = $f0          ' Bottom 4 pins out, top 4 pins in
   If ((PORTB >> 4) != $f) Then getkeyu ' If any keys down, loop
   Pause 50             ' Debounce

getkeyp:
   ' Wait for keypress
   For col = 0 To 3     ' 4 columns in keypad
       PORTB = 0        ' All output pins low
       TRISB = (dcd col) ^ $ff ' Set one column pin to output
       row = PORTB >> 4 ' Read row
       If row != $f Then gotkey ' If any keydown, exit
   Next col
   Goto getkeyp         ' No keys down, go look again

   ' Change row and column to key number 1 - 16
gotkey: 
   key = (col * 4) + (ncd (row ^ $f))
   Return               ' Subroutine over

   End

           

Download the program file.