ME Labs, Inc. | 1-719-520-5323 | Example Program - STRTBLX.pbp

' Name        : STRTBLX.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 40-pin 16F877, 877A or similar
' Hardware    : LAB-X1 Experimenter Board
' Oscillator  : 4MHz external crystal
' Keywords    : LCDOUT, LOOKUP, SEROUT2
' Description : PICBASIC PRO program to demonstrate a method of storing
' text strings in a table. The strings can be called by storing the
' location of the first character in a variable and calling the strout subroutine.
' The string will be sent to both LCD and Serial pin and the main program will
' resume when the null terminating character is encountered in the table.
'

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define LOADER_USED 1

' Define LCD registers and bits
Define LCD_DREG  PORTD
Define LCD_DBIT  0
Define LCD_RSREG PORTE
Define LCD_RSBIT 0
Define LCD_EREG  PORTE
Define LCD_EBIT  1
Define LCD_BITS  8

strloc   VAR BYTE   ' Stores the numerical location of the first character in the string
nextchar VAR BYTE   ' Stores each charater retrieved from the table

' Use constants to hold the locations of your strings. This will make
' modifications easier and it doesn't use any RAM or code space.
hello CON 0         ' "Hello" is at location 0
world CON 6	    ' "World" is at location 6

   ADCON1 = 7       ' Set PORTA and PORTE to digital
   Low PORTE.2      ' LCD R/W line low (W)
   Pause 200        ' Wait for LCD to start up

mainloop:	    ' Main program starts here
   LCDOut $fe, 1    ' Clear LCD screen
   SerOut2 PORTC.6, 396, [10,13,10,13] ' Send linefeeds on serial
   Pause 500        ' Wait .5 second

   strloc = hello   ' Prepare to get string "Hello" (strloc = 0)
   GoSub strout     ' Display the string
   Pause 500        ' Wait .5 second
	
   LCDOut $fe, $c0  ' Move LCD cursor to second line
   SerOut2 PORTC.6, 396, [10,13] ' Send linefeed on serial
   strloc = world   ' Prepare to get string "World" (strloc = 6)
   GoSub strout	    ' Make it so
   Pause 500        ' Wait .5 second
   GoTo mainloop    ' Do it forever

' Beginning of string-display routine
strout: 
   ' Put strings in this table, terminating each with a 0 (null value)
   LookUp strloc, ["Hello",0,"World",0], nextchar ' get character in specified location
   IF nextchar != 0 Then   ' Check for null value (end of string), if not null:
      LCDOut nextchar	   ' Put the character on the display
      SerOut2 PORTC.6, 396, [nextchar]	' Send the character on the serial port.
      strloc = strloc + 1  ' Increment position in table
      GoTo strout	   ' Jump to get another character
   EndIF
   Return		   ' Return when the string is complete
		
   End

           

Download the program file.