ME Labs, Inc. | 1-719-520-5323 | Example Program - I2CX4.pbp

' Name        : I2CX4.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : 8-pin PIC12F675 or similar types
' Hardware    : Lab-X4 board
' Oscillator  : 4MHz internal
' Keywords    : I2CWRITE, I2CREAD, SEROUT
' Description : PICBASIC PRO program to read and write to I2C SEEPROMs
' Write to the first 16 locations of an external serial EEPROM, and then
' read first 16 locations back and send to LCD repeatedly.
' Note this example is for SEEPROMs with byte-sized address.
'

Include "modedefs.bas"  ' Mode definitions for Serout

Define OSCCAL_1K 1      ' Calibrate internal oscillator

LCD Var GPIO.1  ' LCD TX pin
SCL Var GPIO.4  ' Clock pin
SDA Var GPIO.5  ' Data pin

B0 Var Byte     ' Address
B1 Var Byte     ' Data 1
B2 Var Byte     ' Data 2

   ANSEL = 0    ' Set all digital
   CMCON = 7    ' Analog comparators off

   OPTION_REG.7 = 0  ' Enable internal pull ups

   Pause 500         ' Wait for LCD to start up

   For B0 = 0 To 15  ' mainloop 16 times
       B1 = B0 + 100 ' B1 is data for SEEPROM
       I2CWRITE SDA, SCL, $A0, B0, [B1] ' Write each location
       Pause 10      ' Delay 10ms after each write
   Next B0

mainloop:
   For B0 = 0 To 15 Step 2 ' mainloop 8 times
       I2CREAD SDA, SCL, $A0, B0, [B1, B2]  ' Read 2 locations in a row
       Serout LCD, T2400, [$fe, 1, #B0, ": ", #B1, " ", #B2]  ' Display 2 locations
       Pause 1000          ' Wait 1 second
   Next B0

   Goto mainloop

   End

           

Download the program file.