ME Labs, Inc. | 1-719-520-5323 | Example Program - BUTX4.pbp

' Name        : BUTX4.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : PIC12F683
' Hardware    : LAB-X4 Experimenter Board
' Oscillator  : 4MHz internal
' Keywords    : IF THEN
' Description : PICBASIC PRO program to show button press on LED.
' Note: Disable MCLR in config so button can be used.
'

LED Con 0       ' Alias GPIO.0 to LED
PB  Var GPIO.3  ' Alias GPIO.3 to push button

   ANSEL = 0    ' Set all digital
   CMCON0 = 7   ' Analog comparators off

mainloop:   ' Button press turns on LED (MCLRE must not be enabled)
   If PB = 0 Then  ' If button pressed...
      Low LED      ' Turn on LED
   Else
      High LED     ' Turn off LED
   Endif
   Goto mainloop   ' Do it forever

   End

           

Download the program file.