ME Labs, Inc. | 1-719-520-5323 | Example Program - TESTXU.pbp

' Name        : TESTXU.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : MPASM
' Target PIC  : PIC18F4550 or similar type
' Hardware    : LAB-XUSB Experimenter Board
' Oscillator  : 20MHz external
' Keywords    : ADCIN, HSERIN, HSEROUT, LCDOUT, SOUND
' Description : PICBASIC PRO test program for LAB-XUSB.
'

' Define LOADER_USED to allow use of the boot loader.
' This will not affect normal program operation.
Define LOADER_USED 1

' RESET_ORG can be set to move the BASIC program out of the way
' of any boot loader running from location 0, such as the
' Microchip USB boot loader
'Define RESET_ORG 800h

Define OSC 48      ' Core is running at 48MHz

' Define LCD pins
Define LCD_DREG  PORTD
Define LCD_DBIT  4
Define LCD_RSREG PORTE
Define LCD_RSBIT 0
Define LCD_EREG  PORTE
Define LCD_EBIT  1

' Allocate variables
i    Var Byte
leds Var Byte
char Var Byte
col  Var Byte    ' Keypad column
row  Var Byte    ' Keypad row
key  Var Byte    ' Key value
x    Var Byte
y    Var Byte

   BAUDCON.3 = 1        ' Set for 16-bit baud rate generator
   SPBRG = 1249         ' Set for 2400 baud
   SPBRGH = 1249 / 256
   ADCON1 = $d          ' Set PortA 0, 1 to analog inputs
   INTCON2.7 = 0        ' Enable PORTB pullups
   TRISD = 0            ' PORTD to all output
'  Low PORTE.2          ' LCD R/W line low (W)
   Pause 100            ' Wait for LCD to start

   GoTo mainloop        ' Skip subroutines


' Subroutine to get a key from keypad
getkey:
   key = 0                   ' Set to no key
   For col = 0 to 3          ' 4 columns in keypad
     PORTB = 0       ' All output pins low
     TRISB = (dcd col) ^ $ff ' Set one column pin to output
     Pauseus 1
     row = PORTB >> 4        ' Read row
     If row != $f Then gotkey ' If any keydown, exit
   Next col
   Return                    ' No key pressed

gotkey: ' Change row and column to key number 1 - 16
        key = (col * 4) + (ncd (row ^ $f))
        Return               ' Subroutine over

' Subroutine to get a char from serial port
getchar:
   char = 0
   Hserin 0, tlabel, [char]

tlabel:
   Hserout [$55]
   Return

mainloop:
   leds = 1

   For i = 1 to 8       ' Do For loop 8 times
     Adcin 0, x ' Get x value
     Adcin 1, y ' Get y value
     Gosub getkey       ' Get key from keypad
     Gosub getchar      ' Get char from serial port
     Lcdout $fe, 1, "x=", #x, " y=", #y ' Send values to LCD

     If key != 0 Then
        Lcdout $fe, $c0, "key=", #key
     Endif
     If char = $55 Then
        Lcdout $fe, $c8, "loopback"
     Endif

     PORTD = leds
     leds = leds << 1

     Sound PORTC.2, [i * 10 , 16] ' Do it all about 5 times a second
   Next i
   GoTo mainloop        ' Do it forever

   End

           

Download the program file.